Numark Dimension 3 power amplifier

Numark Dimension 3 power amplifier
* Full LED meter display with clip indicators
* Crossover for Subwoofer on rear for each channel
* Subwoofer Frequency adjust knobs: 20-200 Hz
* Stereo/Mono front panel selector
* DC output protection and Short circuit protection
* DIP switch to engage internal compression limiter
* DIP switch for 30Hz/50Hz low frequency roll off filters
* Balanced XLR & 1/4″ (6.3mm) input
* XLR balanced outputs (thru)
* 5-way binding banana plug channel outputs
* 3 Speakon outputs for Channels A/B/Bridge
* Recessed Bridge control switch
* 2x dual speed fans coupled with heatsink cooling for extra protection
* Ground Lift Switch
* Total Harmonic Distortion: Less than 0.002%
* Input sensitivity & Impedance: 1.0 V RMS (0 dBV)
* Hum & Noise: 100 dB, unweighted
* Rear Panel Reset button
* Rated Power Output:
o 650W RMS @ 2 Ohms, 1KHz, 1% THD per channel (stereo)
o 475W RMS @ 4 Ohms, 1KHz, 1% THD per channel (stereo)
o 300W RMS @ 8 Ohms, 1KHz, 1% THD per channel (stereo)
o 1300W RMS @ 4 Ohms, 1KHz, 1% THD (mono bridged)
o 930W RMS @ 8 Ohms, 1KHz, 1% THD (mono bridged)
* Total Harmonic Distortion: Less than 0.002%
* Input sensitivity & Impedance: 1.0 V RMS (0 dBV)
* Hum & Noise: 100 dB, unweighted
* Power Consumption: 10A @ 120V AC 120V/60Hz or 220V/50Hz switchable
* Frequency Response: 10Hz-40kHz, +/-1 dB
* Dimensions (H x W x D):
o 3.5″ x 19″ x 15.9″
o 880mm x 483mm x 405mm
* Weight:
o 31 lbs.
o 14kg.